Film Cameras

Arri BL-4 “Jay”

769188, 35mm camera

Arriflex 35BL-4 camera body "Jay" (WEIGHS 48.8lb)

with lens cap, magazine cap, and viewfinder cap,

bridge plate with two 9" 15mm rods,

viewfinder extender with 2 lens caps,

video assist serial #4013181

Arri pistol grip with 6-pin connector

base plate with rods

Keal case

MUST USE Ronford tripod and Ronford F-15 head with this camera. This is the only head we own that will hold the weight of the camera. Be sure to get a spreader for the legs!

(Part 2) Separate Case with Chrosziel Matte Box

three 6.6X6.6 filter holders

nine knobs of various sizes and colors

five levers of various sizes and colors

Otto Nemenz 3 parts adapter ring that screws together--

largest ring has "Otto Nemenz" written on it, middle ring is metal, smallest ring is rubber

Keal case

WARNING DO NOT PICK MATTEBOX UP BY RING. IT DOES NOT HOLD SECURELY ENOUGH.

MatteBox has been repaired by Derek because it has been dropped in this manner.

(Part 3) R05359 Arri 1000’ mag. for 35BL, serial number 1181, has removable core on feed side, has loop protector, hard case

(Part 4) R05358 Arri 1000’ mag. for 35BL, serial number 2171-Q, has removable core on feed side, has loop protector, hard case

Tripods(s) & Heads that fit this camera

Ronford Tripods:

• 277759
• 277760
• 277761
• 277762
• 487424

WITH Ronford F-15 head

• 791174

Baby Legs that fit this camera

Ronford Low Angle Kit used with Ronford F-15 head

Hi Hat that fits this camera

Mitchell Hi-Hat with O’Connor Model 100 head R05596

Lens(es) Filters that fit this camera

Zeiss PL Mount lenses EXCEPT the 12mm

Cooke 25-250mm zoom lens R05356 Be sure to use the extra long rods!!

MATTE BOX TAKES 6X6 FILTERS

Accessories

Pistol grip comes with camera

Viewfinder extender for 35mm comes with camera

The following Speed Controller/Milliframe Controllers ONLY

• R06074
• R06073
IMPORTANT NOTES
This camera is too heavy to be used with the Porta-Jib, DON’T DO IT!
The mags from the Arri III will not fit this camera DON’T DO IT!
The Illumina lenses may fit on this camera but they will not cover the whole frame DON’T DO IT!
If you use the Cooke lens, be sure to use the extra long rods!