- 4A Lighting Grid Instructions
- 702t_manual
- 744T Shortcuts
- 744t_manual
- Arri Magazine Help Sheet
- ArriBL Tips
- ArriSRTips
- Audio Problem with Sony Video Cameras
- Batteries
- bayonet_to_cmount
- Blimp/Zepplin Shock Mount Assembly
- Bolex Tips
- Computer Cables
- Connect Sound Devices 744T Digtial Audio Recorder to Denecke Time Code Slate
- CP 16 Tips
- DV Tips
- ELECTRICITY IN THE STUDIOS
- Firewire Drives
- Green Screen
- Hard Drive Formatting Windows and Mac
- HMI Lights
- HVR-A1U-US
- International Electrical Plugs
- jib assembly
- Marantz660
- Microphone Chart
- Notes on Electricity
- Oracle Matte Box and Follow Focus
- Panasonic HMC150
- Panasonic HVX
- Panning Rates
- Restricted Items
- Sony EX cameras
- Sony iLINK Warning
- SONY PMW-EX1 MANUAL
- SONY PMW-EX3 MANUAL
- Sony Portadat Tips
- Sony V1U manual
- Sony versus Panasonic
- Sony Z5U
- Speed Controllers
- Splicer
- Troubleshooting the Reservation System
- Vignetting
- Which Battery do I need
- Which bulb do I need
- Which cable do I need
- Which tripod fits my FILM camera.doc
- Which Tripod fits my VIDEO Camera
Equipment Tip Sheets
ARRI SR
To Test:
Run the camera. Do not run it at high speed without film. If you have test film, load and run it.
Examine the gate for dirt or foreign matter.
Examine the interior of camera and magazines for dirt.
Check the pressure plates on the magazines for dirt, scratches or defects. Compressed air may be used to clean magazines.
Verify function of footage counter. Make sure you can set the diopter for your eye.
Test the function of the pistol grip start/stop switch and the variable speed controller.
Test zoom, focus and aperture functions of the lens.
Inspect lens and filters for cleanliness and scratches. Any defects should be brought to the attention of the staff. Ask the staff to clean any dirty optics before you leave.
Test the lens mount to make sure lens is stable and the mount and lock are working properly. UNDER NO CIRCUMSTANCES SHOULD YOU ATTEMPT TO CLEAN THE SHUTTER MIRROR.
Arri SR Batteries
Some Arri SR chargers and batteries are particular about the order that you plug them in. The best way to do this that will work for ALL our Arri SR batteries and chargers is:
Plug battery(batteries) into the charger FIRST. Then plug the charger into the outlet.
