- 4A Lighting Grid Instructions
- 702t_manual
- 744T Shortcuts
- 744t_manual
- Arri Magazine Help Sheet
- ArriBL Tips
- ArriSRTips
- Audio Problem with Sony Video Cameras
- Batteries
- bayonet_to_cmount
- Blimp/Zepplin Shock Mount Assembly
- Bolex Tips
- Computer Cables
- Connect Sound Devices 744T Digtial Audio Recorder to Denecke Time Code Slate
- CP 16 Tips
- DV Tips
- ELECTRICITY IN THE STUDIOS
- Firewire Drives
- Green Screen
- Hard Drive Formatting Windows and Mac
- HMI Lights
- HVR-A1U-US
- International Electrical Plugs
- jib assembly
- Marantz660
- Microphone Chart
- Notes on Electricity
- Oracle Matte Box and Follow Focus
- Panasonic HMC150
- Panasonic HVX
- Panning Rates
- Restricted Items
- Sony EX cameras
- Sony iLINK Warning
- SONY PMW-EX1 MANUAL
- SONY PMW-EX3 MANUAL
- Sony Portadat Tips
- Sony V1U manual
- Sony versus Panasonic
- Sony Z5U
- Speed Controllers
- Splicer
- Troubleshooting the Reservation System
- Vignetting
- Which Battery do I need
- Which bulb do I need
- Which cable do I need
- Which tripod fits my FILM camera.doc
- Which Tripod fits my VIDEO Camera
Equipment Tip Sheets
How to Connect Sound Devices 744T Digtial Audio Recorder to Denecke Time Code Slate
Equipment List:
Sound Device 744T DAR
Denecke TS 2 Time Code Slate
1 XL-LX Lemo 5 pin to XLR-M/XLR F Cable
1 XLR-F balanced to ¼” Un-balanced Cable
Procedure:
Step 1) Make sure the power is turned off on the Time Code Slate and 744T DAR
Step 2) Connect XL-LX Lemo 5 pin to XLR-M/XLR F Cable to Time Code Connector of the 744T DAR (See Fig. 1)
Figure 1
3) Connect XLR M (Labeled “TC Out” ) of the XL-LX cable to XLR F/ ¼” un-balanced (See Fig’s. 2 & 3)
Figure 2
Figure 3
4) Connect ¼” un-balanced connector into ¼” F jack of Time Code Slate (See Fig. 4)
Figure 4
Step 5) Figure 5 shows the completed connection sequence:
Figure 5
Step 6) Power up the 744T DAR ( DO NOT POWER UP TC SLATE)
Step 7) Go onto Menu of the 744T and scroll down until you come to the “Time Code Settings” and select what settings you want to use.
Step 8) Once you have selected your time code settings power up the “Time Code slate”. By waiting to power up the TC Slate last you can then Jam sync TC to the slate via the selected settings in the TC Menus of the 744T DAR.
